Part Inventory
To verify that your kit is complete and to help identify your parts, please refer to these checklists and part guides:
Part Photographs
As a further aid to part identification, check against these photographs of each part in the kit:
1.00mm Spacer
1/4" Washer
2mm Hex Key
3mm Hex Key
6.35mm Spacer
Base Cover
Bearing
Black Corner Bracket
Camera Bolt
Camera Plate
Corner Bracket
Counter-Weight Bag
Cradle Angle Beam
Cradle Bottom Plate (Left and Right Pair)
Cradle Cross Beam
Cradle L-Plate
Cradle Stop
Cradle Top Plate (Left and Right Pair)
Cradle Wing Plate
DC Switch
Double T-Nut
Felt Bob
Felt End Cap
Felt Feet
Felt Strip
Glass Slot Cover
Imaging Bracket
Imaging Top Plate
LED Base Plate
LED Bundle
LED Power Supply and Cable
Horizontal and Vertical Lenses
Lifter Plate
Lighting Module Door
Lighting Module Front
Lighting Module Large Baffle
Lighting Module Side
Lighting Module Small Baffle
L-Plate
M3 Hex Nut
M3 Square Nut
M3 x 6mm Nylon Screw
M3 x 6mm Screw
M3 x 14mm Screw
M5 Fender Washer
M5 Finger Clamp
M5 Lock Nut
M5 Washer
M5 x 6mm Screw
M5 x 8mm Screw
M5 x 10mm Screw
M5 x 16mm Screw
M5 x 30mm Screw
Notched L-Plate
Plastic End Cap
Plastic Rivet
Pulley
Quick Link
Rod End
Rope
Rope Anchor
Side Plate
Single T-Nut
Slot Cover
Strip Plate
T-Plate
V-Bracket
V-Wheel
Zip Tie